Specifications List

* Please note that specifications may be changed without notice.

Sludge Dewatering Press

Sludge Dewatering Press (offered only in Japan)

Mobile Dewatering Truck (offered only in Japan)

Sludge Thickener

Sludge Dewatering Press

GS series

Raw Wastewater /
Waste Activated Sludge /
Chemically Precipitated Sludge
Dissolved-air
Flotation Sludge
Sludge
Concentration
(TS)
0.2% 1.0% 2.0%
GS-101 up to 3kg‐DS/h
(up to 1.5m3/h )
up to 4.5kg‐DS/h
(up to 0.45m3/h )
up to 7.5kg‐DS/h
(up to 0.37m3/h )
GS-131 up to 6kg‐DS/h
(up to 3.0m3/h )
up to 9kg‐DS/h
(up to 0.9m3/h )
up to 15kg‐DS/h
(up to 0.75m3/h )
GS-132 up to 12kg‐DS/h
(up to 6.0m3/h )
up to 18kg‐DS/h
(up to 1.8m3/h )
up to 30kg‐DS/h
(up to 1.5m3/h )
GS-201 up to 13kg‐DS/h
(up to 6.5m3/h )
up to 20kg‐DS/h
(up to 2.0m3/h )
up to 33kg‐DS/h
(up to 1.67m3/h )
GS-202 up to 26kg‐DS/h
(up to 13.0m3/h )
up to 40kg‐DS/h
(up to 4.0m3/h )
up to 66kg‐DS/h
(up to 3.3m3/h )
GS-301 up to 30kg‐DS/h
(up to 15.0m3/h )
up to 45kg‐DS/h
(up to 4.5m3/h )
up to 75kg‐DS/h
(up to 3.75m3/h )
GS-302 up to 60kg‐DS/h
(up to 30.0m3/h )
up to 90kg‐DS/h
(up to 9.0m3/h )
up to 150kg‐DS/h
(up to 7.5m3/h )
GS-303 up to 90kg‐DS/h
(up to 45.0m3/h )
up to 135kg‐DS/h
(up to 13.5m3/h )
up to 225kg‐DS/h
(up to 11.25m3/h )
GS-351 up to 60kg‐DS/h
(up to 30.0m3/h )
up to 90kg‐DS/h
(up to 9.0m3/h )
up to 150kg‐DS/h
(up to 7.5m3/h )
GS-352 up to 120kg‐DS/h
(up to 60.0m3/h )
up to 180kg‐DS/h
(up to 18.0m3/h )
up to 300kg‐DS/h
(up to 15.0m3/h )
GS-353 up to 180kg‐DS/h
(up to 90.0m3/h )
up to 270kg‐DS/h
(up to 27.0m3/h )
up to 450kg‐DS/h
(up to 22.5m3/h )
GS-354 up to 240kg‐DS/h
(up to 120.0m3/h )
up to 360kg‐DS/h
(up to 36.0m3/h )
up to 600kg‐DS/h
(up to 30.0m3/h )
Model Dimensions (mm) Total Power
Consumption (kW)
Weight (kg)
L W H Empty Operation
GS-101 1900 1105 1440 0.4 330 530
GS-131 2045 1105 1440 0.4 340 540
GS-132 2045 1135 1440 0.5 390 600
GS-201 2485 1105 1440 0.5 500 720
GS-202 3165 1465 1855 1.35 1260 1885
GS-301 3765 1415 1855 1.35 1240 1890
GS-302 3985 1700 1855 1.75 1775 2775
GS-303 4165 2000 1855 2.15 2200 3480
GS-351 4500 1635 2250 2.45 2135 3105
GS-352 5180 1910 2255 5.95 4100 6730
GS-353 5430 2310 2255 7.45 5070 9220
GS-354 5580 2860 2255 8.95 6630 10700

* Throughput above is calculated as approximate and may vary depending on sludge condition. For model selection, please contact us.
* Throughput of each model is based on sludge cake with 20±5% solids content.
* There is no certain upper limitation on inlet sludge concentration, however, the target sludge must be flowable.
* Throughput of DAF Sludge is based on sludge containing much fat, oil, and grease such as meat processing applications etc.

* GS-401 to 404 are scheduled to be released at the end of 2019.

* The specifications of GS-401 to 404 are based on the date derived from their initial stage of development. Thus, they may be subject to change by modification for further improvements.

Sludge Dewatering Press

FS Series

Raw Wastewater /
Waste Activated Sludge /
Chemically Precipitated Sludge
Dissolved-air
Flotation Sludge
Mixed Raw Sludge
Sludge
Concentration(TS)
0.2% 1.0% 2.0% 5.0% 3.0%
FS-101 up to 2kg‐DS/h
(up to 1.0m3/h )
up to 3kg‐DS/h
(up to 0.3m3/h )
up to 5kg‐DS/h
(up to 0.25m3/h )
up to 10kg‐DS/h
(up to 0.20m3/h )
up to 13kg‐DS/h
(up to 0.43m3/h )
FS-131 up to 4kg‐DS/h
(up to 2.0m3/h )
up to 6kg‐DS/h
(up to 0.6m3/h )
up to 10kg‐DS/h
(up to 0.5m3/h )
~up to 20kg‐DS/h
(up to 0.4m3/h )
up to 26kg‐DS/h
(up to 0.87m3/h )
FS-132 up to 8kg‐DS/h
(up to 4.0m3/h )
up to 12kg‐DS/h
(up to 1.2m3/h )
up to 20kg‐DS/h
(up to 1.0m3/h )
up to 40kg‐DS/h
(up to 0.8m3/h )
up to 52kg‐DS/h
(up to .74m3/h )
FS-201 up to 9kg‐DS/h
(up to 4.5m3/h )
up to 13kg‐DS/h
(up to 1.3m3/h )
up to 22kg‐DS/h
(up to 1.1m3/h )
up to 4kg‐DS/h
(up to 0.88m3/h )
up to 57kg‐DS/h
(up to 1.9m3/h )
FS-202 up to 18kg‐DS/h
(up to 9.0m3/h )
up to 6kg‐DS/h
(up to 2.6m3/h )
up to 44kg‐DS/h
(up to 2.2m3/h )
up to 88kg‐DS/h
(up to 1.76m3/h )
up to 114kg‐DS/h
(up to 3.8m3/h )
FS-301 up to 20kg‐DS/h
(up to 10.0m3/h )
up to 30kg‐DS/h
(up to 3.0m3/h )
up to 50kg‐DS/h
(up to 2.5m3/h )
up to 100kg‐DS/h
(up to 2.0m3/h )
up to 130kg‐DS/h
(up to 4.33m3/h )
FS-302 up to 40kg‐DS/h
(up to 20.0m3/h )
up to 60kg‐DS/h
(up to 6.0m3/h )
up to 00kg‐DS/h
(up to 5.0m3/h )
up to 200kg‐DS/h
(up to 4.0m3/h )
up to 260kg‐DS/h
(up to 8.67m3/h )
FS-351 up to 40kg‐DS/h
(up to 20.0m3/h )
up to 60kg‐DS/h
(up to 6.0m3/h )
up to 100kg‐DS/h
(up to 5.0m3/h )
up to 200kg‐DS/h
(up to 4.0m3/h )
up to 260kg‐DS/h
(up to 8.67m3/h )
FS-352 up to 80kg‐DS/h
(up to 40.0m3/h )
up to 120kg‐DS/h
(up to 12.0m3/h )
up to 200kg‐DS/h
(up to 10.0m3/h )
up to 400kg‐DS/h
(up to 8.0m3/h )
up to 520kg‐DS/h
(up to 17.3m3/h )
FS-401 up to 67kg‐DS/h
(up to 33.5m3/h )
up to 100kg‐DS/h
(up to 10.0m3/h )
up to 160kg‐DS/h
(up to 8.0m3/h )
up to 320kg‐DS/h
(up to 6.4m3/h )
up to 416kg‐DS/h
(up to 13.8m3/h )
FS-402 up to 133kg‐DS/h
up to ~66.5m3/h )
up to 200kg‐DS/h
(up to 20.0m3/h )
up to 320kg‐DS/h
(up to 16.0m3/h )
up to 640kg‐DS/h
(up to 12.8m3/h )
up to 832kg‐DS/h
(up to 27.7m3/h )
FS-403 up to 200kg‐DS/h
(up to 100.0m3/h )
up to 300kg‐DS/h
(up to 30.0m3/h )
up to 480kg‐DS/h
(up to 24.0m3/h )
up to 960kg‐DS/h
(up to 19.2m3/h )
up to 1248kg‐DS/h
(up to 41.6m3/h )
FS-404 up to 267kg‐DS/h
(up to 133.5m3/h )
up to 400kg‐DS/h
(up to 40.0m3/h )
up to 640kg‐DS/h
(up to 32.0m3/h )
up to 1280kg‐DS/h
(up to 25.6m3/h )
up to 1664kg‐DS/h
(up to 55.4m3/h )
Model Dimensions(mm) Total Power
Consumption(kW)
Weight(kg)
L W H Empty Operation
FS-101 2131 911 1300 0.3 230 360
FS-131 2276 911 1300 0.3 240 370
FS-132 2361 1027 1300 0.4 320 510
FS-201 2806 1034 1450 0.4 430 620
FS-202 2876 1509 1205 1.0 890 1370
FS-301 3395 1150 1780 1.0 910 1325
FS-302 3890 1470 1844 1.4 1510 2270
FS-351 4114 1325 2250 2.1 1800 2550
FS-352 4775 1645 2250 3.95 2780 3960
FS-401 5700 1650 2250 2.45 2900 4820
FS-402 5900 2000 2250 4.9 5200 7320
FS-403 6500 2700 2250 6.7 7400 11800
FS-404 7000 3200 2250 9.0 8800 14400

*Throughput above is calculated as approximate and may vary depending on sludge condition. For model selection, please contact us.
*Throughput of each model is based on sludge cake with 20±5% solids content.
*There is no certain upper limitation on inlet sludge concentration, however, the target sludge must be flowable.
*Throughput of DAF Sludge is based on sludge containing much fat, oil, and grease such as meat processing applications etc.

* Throughput of  Mixed Sludge (Primary Sludge and Waste Activated Sludge) is based on sludge containing 20% fiber (150 micron mesh clearance) against Total Solids.

Specifications shall be changed depending on sludge conditions.

*FS-401 to 404 are scheduled to be released at the end of 2019.
*The specifications of FS-401 to 404 are based on the date derived from their initial stage of development. Thus, they may be subject to change by modification for further improvements.
*The above figures are for the models with two chemical inlets. Also, it is possible to provide one chemical inlet models, so please contact us for details.

Sludge Dewatering Press

EC Series

Raw Wastewater /
Waste Activated Sludge /
Chemically Precipitated Sludge
Dissolved-air
Flotation Sludge
Mixed Raw Sludge
Sludge
Concentration
(TS)
0.2% 1.0% 2.0% 5.0% 3.0%
EC-101 up to 2kg-DS/h
(up to 1.0m3/h)
up to 3kg-DS/h
(up to 0.3m3/h)
up to 5kg-DS/h
(up to 0.25m3/h)
up to 10kg-DS/h
(up to 0.2m3/h)
up to 13kg-DS/h
(up to 0.43m3/h)
EC-102 up to 4kg-DS/h
(up to 2.0m3/h)
up to 6kg-DS/h
(up to 0.6m3/h)
up to 10kg-DS/h
(up to 0.5m3/h)
up to 20kg-DS/h
(up to 0.4m3/h)
up to 26kg-DS/h
(up to 0.87m3/h)
EC-131 up to 4kg-DS/h
(up to 2.0m3/h)
up to 6kg-DS/h
(up to 0.6m3/h)
up to 10kg-DS/h
(up to 0.5m3/h)
up to 20kg-DS/h
(up to 0.4m3/h)
up to 26kg-DS/h
(up to 0.87m3/h)
EC-132 up to 8kg-DS/h
(up to 4.0m3/h)
up to 12kg-DS/h
(up to 1.2m3/h)
up to 20kg-DS/h
(up to 1.0m3/h)
up to 40kg-DS/h
(up to 0.8m3/h)
up to 52kg-DS/h
(up to 1.73m3/h)
EC-133 up to 12kg-DS/h
(up to 6.0m3/h)
up to 18kg-DS/h
(up to 1.8m3/h)
up to 30kg-DS/h
(up to 1.5m3/h)
up to 60kg-DS/h
(up to 1.2m3/h)
up to 78kg-DS/h
(up to 2.6m3/h)
EC-202 up to 16kg-DS/h
(up to 8.0m3/h)
up to 24kg-DS/h
(up to 2.4m3/h)
up to 40kg-DS/h
(up to 2.0m3/h)
up to 80kg-DS/h
(up to 1.6m3/h)
up to 104kg-DS/h
(up to 3.47m3/h)
EC-203 up to 24kg-DS/h
(up to 12m3/h)
up to 36kg-DS/h
(up to 3.6m3/h)
up to 60kg-DS/h
(up to 3.0m3/h)
up to 120kg-DS/h
(up to 2.4m3/h)
up to 156kg-DS/h
(up to 5.2m3/h)
EC-204 up to 32kg-DS/h
(up to 16m3/h)
up to 48kg-DS/h
(up to 4.8m3/h)
up to 80kg-DS/h
(up to 4.0m3/h)
up to 160kg-DS/h
(up to 3.2m3/h)
up to 208kg-DS/h
(up to 6.93m3/h)
EC-205 up to 40kg-DS/h
(up to 20m3/h)
up to 60kg-DS/h
(up to 6.0m3/h)
up to 100kg-DS/h
(up to 5.0m3/h)
up to 200kg-DS/h
(up to 4.0m3/h)
up to 260kg-DS/h
(up to 8.67m3/h)
Model Dimensions (mm) Total Power
Consumption (kW)
Weight (kg)
L W H Empty Operation
EC-101 1757 700 1705 0.7 270 670
EC-102 1757 900 1705 0.8 320 820
EC-131 1757 700 1705 0.7 285 685
EC-132 1757 900 1705 0.8 350 850
EC-133 1847 1100 1705 0.9 420 1070
EC-202 2485 1180 1728 1.45 870 1820
EC-203 2591 1470 1728 1.8 1075 2375
EC-204 2665 1780 1728 2.7 1470 3120
EC-205 2741 2085 1728 2.9 1820 3720

* Throughput above is calculated as approximate and may vary depending on sludge condition.For model selection, please contact us.

* Throughput of each model is based on sludge cake with 20±5% solids content.

* There is no certain upper limitation on inlet sludge concentration, however, the target sludge must be flowable.

* Throughput of DAF Sludge is based on sludge containing much fat, oil, and grease such as meat processing applications etc.

* Throughput of  Mixed Sludge (Primary Sludge and Waste Activated Sludge) is based on sludge containing 20% fiber (150 micron mesh clearance) against Total Solids.

Specifications shall be changed depending on sludge conditions.

Sludge Dewatering Press

ES-051

Raw Wastewater /
Waste Activated Sludge /
Chemically Precipitated Sludge
Dissolved-air
Flotation Sludge
Sludge
Concentration
(TS)
0.2% 1.0% 2.0%
ES-051 up to 0.5kg-DS/h
(up to 0.25m3/h)
up to 1kg-DS/h
(up to 0.1m3/h)
up to 2kg-DS/h
(up to 0.1m3/h)
Model Dimensions (mm) Total Power
Consumption (kW)
Weight (kg)
L W H Empty Operation
ES-051 1095 749 1100 0.2 160 180

* Throughput above is calculated as approximate and may vary depending on sludge condition.

For model selection, please contact us.

* Throughput of each model is based on sludge cake with 20±5% solids content.

* There is no certain upper limitation on inlet sludge concentration, however, the target sludge must be flowable.

* Throughput of DAF Sludge is based on sludge containing much fat, oil, and grease such as meat processing applications etc.

Sludge Dewatering Press (offered only in Japan)

MS Series

[ offered only in Japan ]

Model Throughput
(kg-DS/h)
Dimensions (mm) Total Power
Consumption (kW)
Weight (kg)
L W H Empty Operation
MS-201A 6 to 8 2650 1640 2320 1.915 930 2200
MS-202A 12 to 16 2650 1940 2320 2.115 1230 2700
MS-203A 18 to 24 2650 2240 2320 2.815 1530 3300
MS-204A 24 to 32 2750 2040 2320 3.665 2000 3500
MS-205A 30 to 40 2750 2340 2320 3.865 2300 4100
* Throughput is based on the standard value of the sludge concentration with TS 0.2% to 0.4%, and the water content of dewatered cake being 83% by adding Polyferric sulphate and ampholytic polymer.
* Throughput above is calculated as approximate and may vary depending on sludge condition. For model selection, please contact us.

Mobile Dewatering Truck (offered only in Japan)

MV Series

[ offered only in Japan ]

Model Throughput Base Vehicle Dimensions (mm) Total Power
Consumption (kW)
Weight (kg)
L W H Empty Operation
MV-1 up to 20kg‐DS/h
(up to 2.0m3/h )
4-ton truck

(Total vehicle weight less than 8-ton)

7200 2280 3300 3.5 3800 4500
MV-2 up to 45kg‐DS/h
(up to 4.5m3/h )
8-ton truck

(Total vehicle weight less than 11-ton)

8885 2280 3300 7.92 6400 7700
MV-3 up to 90kg‐DS/h
(up to 9.0m3/h )
8.67 6800 8500
【Standard Accessories】Sludge dewatering press, Polymer make-up system, Polyferric Sulfate dosing pump, Other pumps, Dewatered cake conveyor, Generator, Power cable and Hoses

* Throughput above is calculated as approximate and may vary depending on sludge condition.

For model selection, please contact us.

* Throughput of each model is based on sludge cake with 20±5% solids content.

* Throughput is based on waste activated sludge and chemically precipitated sludge with TS 1.0%.

Sludge Thickener

VT Series

Model Capacity (Inflow)
(m3/h)
Dimensions (mm) Total Power
Consumption (kW)
Weight (kg)
L W H Empty Operation
VT-101 up to 1 1772 901 1250 0.3 160 290
VT-131 up to 3 1772 901 1250 0.3 170 300
VT-201 up to 10 2436 901 1737 1.15 360 680
VT-301 up to 30 3463 1320 2026 1.5 840 1650
VT-302 up to 60 4778 1685 2026 3 1500 4200
VT-303 up to 90 4978 1930 2026 4.45 1950 5550
* Capacity is based on waste activated sludge from biological treatment with TS 0.4% and thickening up to 4% with polymer.
* Figures above are calculated as approximate and may vary depending on sludge condition. For model selection, please contact us.

Feel free to contact us for any inquiries
about sludge treatment and wastewater treatment.

Inquiries about Products, operation instructions, troubleshooting and repairs

  • Sludge Dewatering Press & Thickener
  • Sludge dryer & sludge dewatering and fermentation system
  • Water Treatment Chemicals
  • Other Products

Inquiry by Phone

+81-45-540-8580

Weekdays 9:00~17:00

top