Installation in a narrow space

Meat processing factory

Problem

This factory had used multi disc type dewatering equipment for long time; however, they had been facing problems such as aging and lack of throughput of the equipment.
Due to a limited space for the dewatering equipment, they were looking for compact dewatering equipment with larger capacity.

AMCON's offer for a solution

AMCON offered Sludge Dewatering Press Volute ES-303 model which can handle 12.8 m3/hr. as maximum for this sludge concentration at 7,000 mg/L. In case the existing building is too small to install this large scale equipment, large-scale construction work could be necessary such as re-construction of a new building or breakings down of the entrance. AMCON’s Sludge Dewatering Press Volute can be divided into the Flocculation Tank part and the Screw part, which enabled transportation and installation through the existing narrow entrance. Water content resulted in better than the previous value at 85%. Customer’s comment: “It is helpful to be able to confirm flocculation and filtrate condition at sight.”

Go to list

Feel free to contact us for any inquiries
about sludge treatment and wastewater treatment.

Inquiries about Products, operation instructions, troubleshooting and repairs

  • Sludge Dewatering Press & Thickener
  • Sludge dryer & sludge dewatering and fermentation system
  • Water Treatment Chemicals
  • Other Products

Inquiry by Phone

+81-45-540-8580

Weekdays 9:00~17:00

Dewatering low-concentration sludge

Manufacturing Plant of Synthetic Fiber Materials in Indonesia

Problem

Before installation of Volute Dewatering Press, they threw cake into their dryer after dewatering by their belt press . Drain of Synthetic Fibers purified from oil was not suitable for micro-organisms and was low MLSS. In addition , sludge concentration from thickening tank was quite low(6,000mg/L). So, Water content in Sludge cake became 92% by belt press machine. Because of throwing the soft sludge like Tofu, the load was pretty high.

AMCON’s offer for a solution

Since Volute Dewatering Press adopted the unified structure that serves two functions, thickening and dewatering in the single machinery, the low concentration sludge can be dewatered. The drum filter, because of the clog-free, realizes higher speed of filtering phenomena per filtering area as compared to the methods, and the sludge is instantly thickened by gravity. They can constantly throw sludge into the dryer by installation of Volute that can keep 85 % of water content so easily.

Go to list

Dewatering of oily sludge without clogging

Chicken processing plant in Ukraine

Problem

The chicken processing plant in Ukraine had a big issue on tremendous amount of sludge disposal costs due to direct disposal of the sludge without dewatering. They had tried to look for a suitable sludge dewatering equipment for easy dewatering of the oily sludge, however it was almost impossible to find.

AMCON's offer for a solution

The customer installed ES-303 model understanding of the advantage of Volute Dewatering Press; high resistance to oily sludge.
Customer’s comment: “We used to hesitate to install dewatering equipment due to anxiety for problems such as clogging and frequent maintenance of equipment for dewatering of oily sludge. However we are surprised at the fact that Volute hardly has clogging. The full automatic operation is very helpful for easy management. The water content in sludge cake is as good as 71.5%, which is the performance of the Volute Dewatering Press we are greatly satisfied with. We really realize that the installation of Volute is the best choice we made.”

Go to list

top